A Systematic Review of Geometric Road Design Evaluation Methods with AutoCAD Civil 3D Applications: Tinjauan Sistematis Metode Evaluasi Desain Geometris Jalan dengan Aplikasi AutoCAD Civil 3D

Bangkit Yanuar Yularso Candra; Asep Dian Heryadiana; Joewono Prasetijo

doi:10.31004/riggs.v4i2.1414

Authors

Bangkit Yanuar Yularso Candra Universitas Majalengka
Asep Dian Heryadiana Universitas Majalengka
Joewono Prasetijo Universiti Tun Hussein Onn Malaysia

DOI:

https://doi.org/10.31004/riggs.v4i2.1414

Keywords:

Road Design, Geometric Evaluation, BIM.

Abstract

Geometric road design is fundamental to the development of efficient, safe, and sustainable transportation systems. In recent years, the application of digital tools, particularly AutoCAD Civil 3D, has significantly improved the accuracy and efficiency of road design processes. This systematic review investigates evaluation methods for geometric road design published between 2020 and 2025, with a focus on the use of AutoCAD Civil 3D as a primary tool. The review synthesizes findings from peer-reviewed journals, highlighting how Civil 3D has been applied in tasks such as horizontal and vertical alignment analysis, cross-section modeling, and corridor development. Results indicate that AutoCAD Civil 3D not only streamlines the design workflow but also supports better decision-making through three-dimensional visualization and real-time data integration. However, the review also identifies several limitations, including software complexity, the need for specialized training, and challenges in interoperability with other systems. Overall, this study emphasizes the critical role of AutoCAD Civil 3D in modern road design evaluation and encourages the adoption of standardized methodologies and continuous professional development to optimize its application in transportation infrastructure planning

Downloads

Download data is not yet available.

References

P. T. Anugraha and A. I. Rifai, “Road Geometric Redesign used AutoCAD ® 2D : A Case Jalan Majalengka-Rajagaluh,” 2022.

D. Nugraha, R., Hidayat, T., & Firmansyah, “Efficiency of BIM applications in road design using Civil 3D,” Int. J. Eng. Technol. Innov., vol. 12(1), pp. 35–44, 2022.

M. F. Assalam, A. I. Rifai, and M. Taufik, “The Effectiveness Analysis of Frontage Road on Jalan Margonda Raya, Depok,” Indones. …, 2022.

N. P. Farazi, B. Zou, T. Ahamed, and L. Barua, “Deep reinforcement learning in transportation research: A review,” Transp. Res. …, 2021.

A. Verma, V. Harsha, and G. H. Subramanian, “Evolution of urban transportation policies in India: A review and analysis,” Transp. Dev. …, 2021, doi: 10.1007/s40890-021-00136-1.

L. Khan, A. R., Liu, X., & Yu, “Horizontal alignment design and safety implications on two-lane highways,” J. Transp. Saf. Secur., vol. 13(4), pp. 442–460, 2021.

M. Isradi, N. D. Nareswari, A. I. Rifai, and ..., “Performance Analysis of Road Section and Unsignalized Intersections in Order to Prevent Traffic Jams on Jl H. Djole–Jl. Pasar Lama,” Int. J. …, 2021.

A. Setiadi, R., & Rahman, “Digital approach for geometric road evaluation using BIM technology,” Int. J. Civ. Eng. Technol., vol. 14(2), pp. 89–96, 2023.

M. M. Rahman and J. C. Thill, “Impacts of connected and autonomous vehicles on urban transportation and environment: A comprehensive review,” Sustain. Cities Soc., 2023.

R. A. F. Wiguna and A. I. Rifai, “analisis text clustering masyarakat di twitter mengenai omnibus law menggunakan Orange Data Mining,” J. Inf. Syst. Informatics, 2021.

S. Syaiful and H. Rusfana, “Rigid Pavement Planning in Traffic: Case Study in Ciherang Road and Pemuda Road, Bogor Regency, Indonesia,” J. Appl. Eng. Sci., vol. 20, no. 2, pp. 485–497, 2022, doi: 10.5937/jaes0-33565.

E. O. Joice, A. I. Rifai, and M. Taufik, “The Link Road Design of Jalan Plupuh Tanon And Jalan Gabugan Section 1, Sragen Indonesia,” Indones. J. Multidiscip. Sci., vol. 1, no. 1, pp. 211–223, 2023, doi: 10.55324/ijoms.v1i1.384.

E. Purnama, A. Savitri, and A. Fajarika, “ROAD GEOMETRIC REDESIGN USED AUTOCAD ® 2D : A CASE JALAN SILIWANGI MAJALENGKA , INDONESIA,” vol. 2, no. 2, pp. 705–715, 2024, doi: 10.37253/leader.v2i1.9538.

R. Alwan, Z., Jones, P., & Holgate, “BIM-based design assessment for sustainable road infrastructure,” Autom. Constr., vol. 124, p. 103575, 2021.

I. M. Diop, C. Cherifi, C. Diallo, and H. Cherifi, “Revealing the component structure of the world air transportation network,” Appl. Netw. Sci., 2021, doi: 10.1007/s41109-021-00430-2.

A. C. Herdiana, “Narrative Review : Sistem Transportasi Publik Di Smart City Jakarta Untuk Mengurangi Kemacetan,” no. 4, pp. 1–7, 2021.

Z. Zang, X. Xu, K. Qu, R. Chen, and A. Chen, “Travel time reliability in transportation networks: A review of methodological developments,” Transp. Res. Part C …, 2022.

N. Hulu, L. M. Harahap, S. Marbun, D. A. Putri, and K. Kunci, “Efisiensi Distribusi melalui Optimasi Biaya dan Jarak dengan Pendekatan Metode Transportasi,” vol. 1, no. 1, pp. 1–5, 2025.

N. Ulchurriyyah, A. I. Rifai, and ..., “The Geometric Redesign of Horizontal Curved Using AutoCAD Civil 3D®: A Case Jalan Garuda–Jalan Moh. Hatta, Tasikmalaya West Java,” Indones. …, 2022.

S. Lestiyono, “Efisiensi Penggunaan Transportasi Publik Berbasis Rel ( Literature Review ),” vol. 3, no. 1, pp. 124–130, 2025.

A. I. Rifai, J. Prasetijo, M. Pasha, and S. Handayani, The implementation of autocad® civil 3D for road geometric redesign on educational areas: a case Leumah Neundet. eprints.uthm.edu.my, 2023.

C. Bai, Z. Chen, and D. Wang, “Transportation carbon emission reduction potential and mitigation strategy in China,” Sci. Total Environ., 2023.

F. Jelti, A. Allouhi, and K. A. T. Aoul, “Transition paths towards a sustainable transportation system: a literature review,” Sustainability, 2023.

A. A. Oliveira, D. S., Ferreira, J. C., & Costa, “Integration of 3D modeling tools in road maintenance planning,” Transp. Res. Procedia, vol. 45, pp. 245–252, 2020.

E. T. Elizabeth, A. I. Rifai, and M. Pamadi, “Meningkatkan Kapasitas Terminal dan Kepuasan Penumpang Bandara Hang Nadim Batam Menggunakan Regresi Linear Sederhana dan Customer …,” J. Manaj. Teknol. …, 2022.

W. Wincent, A. I. Rifai, and M. Isradi, “The Road Performance Analysis in Jalan Ahmad Yani Batam Using IHCM 1997,” Indones. …, 2022.

M. Isradi, J. Prasetijo, T. S. Aden, and ..., “Relationship of present serviceability index for flexible and rigid pavement in urban road damage assessment using pavement condition index and international …,” E3S Web …, 2023.

Y. A. Sari, A. I. Rifai, and K. Wiliansyah, “The Phenomenon of On-Street Parking In A Residential Area In Batam City,” Rekayasa Sipil, 2021.

J. Victory, A. I. Rifai, I. Indrastuti, and M. Isradi, “Bibliometric Analysis of Health and Safety Risk Management in Highrise Building Construction,” Asian J. Eng. …, 2024.

L. P. Joseph, A. I. Rifai, and M. Taufik, “The Unsignaled Intersection Performance Analysis of Arterial Access Road at Karawang Barat 1Toll Gate, West Java,” Indones. …, 2022.

J. Chen et al., “Transunet: Transformers make strong encoders for medical image segmentation,” arXiv Prepr. arXiv …, 2021.

J. Andreas, A. I. Rifai, and M. Taufik, “The analysis of road service level due to rail crossing: a case of railway cisauk station area, tangerang indonesia,” Indones. …, 2022.

A. I. Rifai, Y. A. Sari, S. Pratama, A. Dewa, and ..., “Penggunaan Internet yang Sehat dan Aman (INSANI) untuk Generasi yang Cerdas,” Natl. Conf. …, 2022.

V. Shepelev, S. Aliukov, K. Nikolskaya, and S. Shabiev, “The capacity of the road network: Data collection and statistical analysis of traffic characteristics,” Energies, 2020.

A. I. Rifai and F. Arifin, “Analysis of the level of passenger satisfaction with services and transport facilities-based integration in Jakarta,” J. World Conf. …, 2020.

A. I. Rifai and F. A. Fernanda, “Influence on The Level Riders Motorcycle Accident Traffic with Traffic Methods of Conflict Technique (TCT)(Case Study: Jalan Raya Narogong Bekasi City),” J. World …, 2020.

A. Arifin and A. I. Rifai, “Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD® Civil 3D (STA 3+ 000-STA. 4+ 800),” Citiz. J. Ilm. Multidisiplin …, 2022.

A. I. Rifai, T. Wibowo, M. Isradi, and A. Mufhidin, “On-Street Parking and Its Impact on Road Performance: Case Commercial Area in Jakarta City,” World J. Civ. …, 2020.

H. A. Setiaputri, M. Isradi, A. I. Rifai, A. Mufhidin, and ..., “Analysis Of Urban Road Damage With Pavement Condition Index (PCI) And Surface Distress Index (SDI) Methods,” … Int. J. …, 2021.

A. I. Rifai, M. Hafidh, M. Isradi, and J. Prasetijo, “The ANALISIS KINERJA COLD PAVING HOT MIX ASBUTON DENGAN FILLER PORTLAND CEMENT TERHADAP INTENSITAS RENDAMAN,” Teknisia, 2023.

A. S. Akopov and L. A. Beklaryan, “Evolutionary Synthesis of High-Capacity Reconfigurable Multilayer Road Networks Using a Multiagent Hybrid Clustering-Assisted Genetic Algorithm,” IEEE Access, 2025.

E. Purnama, A. I. Rifai, and N. Nasrun, “Analysis of Road Performance Used Indonesian Highway Capacity Manual 1997: A Case Jalan KH Abdul Halim Majalengka-Indonesia,” Citiz. J. Ilm. …, 2022.

B. Rulianto, A. I. Rifai, M. Isradi, and ..., “A Comparative Analysis of the Effectiveness of Airport Public Transport System in Jakarta,” World J. Bus. …, 2021.

T. Resinta, A. I. Rifai, and A. J. Saputra, “Implementation of Hec-ras Software (Version) on the Effectiveness of Drainage Channel Analysis Using Bibliometric Methods,” OPSearch Am. J. Open …, 2024.

W. Zhao, Y. Zhang, L. Li, W. Su, B. Li, and Z. Fu, “Snow melting on the road surface driven by a geothermal system in the severely cold region of China,” Sustain. energy Technol. …, 2020.

V. Shepelev, S. Aliukov, K. Nikolskaya, A. Das, and ..., “The use of multi-sensor video surveillance system to assess the capacity of the road network,” Transp. …, 2020, doi: 10.2478/ttj-2020-0002.

D. Elche, P. Ruiz-Palomino, and ..., “Servant leadership and organizational citizenship behavior: The mediating effect of empathy and service climate,” Int. J. …, 2020, doi: 10.1108/IJCHM-05-2019-0501.

V. Yong, A. Savitri, and A. I. Rifai, “INSPEKSI NON-DESTRUKTIF PADA PONDASI BANGUNAN PESISIR: STUDI KASUS GEDUNG PASAR PULAU BELAKANG PADANG,” J. Kacapuri J. Keilmuan …, 2023.

J. Prasetijo, A. I. Rifai, S. Ismail, M. A. Azahari, and ..., “Modeling Train Accidents and Incidents Based on Zero-Inflated Poisson Method,” … Dev. …, 2024, doi: 10.3233/ATDE241179.

A. M. Lubis, A. I. Rifai, and A. Savitri, “Bibliometric Analysis of Drainage System Performance Against Urban Flooding Using Vosviewer,” OPSearch Am. J. Open …, 2024.

P. Zhou and K. Han, “ESIPT‐based AIE luminogens: Design strategies, applications, and mechanisms,” Aggregate, 2022, doi: 10.1002/agt2.160.

G. Tang, C. Tang, C. Claramunt, X. Hu, and P. Zhou, “Geometric A-star algorithm: An improved A-star algorithm for AGV path planning in a port environment,” IEEE access, 2021.

D. Jafari, T. H. J. Vaneker, and I. Gibson, “Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts,” Mater. &Design, 2021.

C. Y. Wang, H. Y. M. Liao, and I. H. Yeh, “Designing network design strategies through gradient path analysis,” arXiv Prepr. arXiv2211.04800, 2022.

M. Yu, C. Zheng, and C. Ma, “Analysis of injury severity of rear-end crashes in work zones: A random parameters approach with heterogeneity in means and variances,” Anal. methods Accid. Res., 2020.

Y. Du, J. Wang, C. Rizos, and A. El-Mowafy, “Vulnerabilities and integrity of precise point positioning for intelligent transport systems: Overview and analysis,” Satell. Navig., 2021, doi: 10.1186/s43020-020-00034-8.

U. L. Rohde, E. Rubiola, and J. C. Whitaker, Microwave and wireless synthesizers: theory and design. books.google.com, 2021.

V. D. Bhise, Ergonomics in the Automotive Design Process: Advanced Topics, Measurements, Modeling and Research. taylorfrancis.com, 2024. doi: 10.1201/9781003485605.

M. M. Rana and K. Hossain, “Connected and autonomous vehicles and infrastructures: A literature review,” Int. J. Pavement Res. …, 2023, doi: 10.1007/s42947-021-00130-1.

P. Leavy, Research design: Quantitative, qualitative, mixed methods, arts-based, and community-based participatory research approaches. books.google.com, 2022.

Y. Ma et al., “Recent advances in transition metal oxides with different dimensions as electrodes for high-performance supercapacitors,” … Compos. Hybrid …, 2021, doi: 10.1007/S42114-021-00358-2.