The Influence of Puncture Valve Wear on Bosch Pump Pressure and Main Engine Performance: A Quantitative Analysis of KM. Tanto Bersinar

Langgeng Setiawan; Agus Prawoto; Dyah Ratnaningsih; Shofa Dai Robbi; Antonius Edy Kristiyono

doi:10.31004/riggs.v5i1.6544

Authors

Langgeng Setiawan Politeknik Pelayaran (Poltekpel) Surabaya
Agus Prawoto Politeknik Pelayaran (Poltekpel) Surabaya
Dyah Ratnaningsih Politeknik Pelayaran (Poltekpel) Surabaya
Shofa Dai Robbi Politeknik Pelayaran (Poltekpel) Surabaya
Antonius Edy Kristiyono Politeknik Pelayaran (Poltekpel) Surabaya

DOI:

https://doi.org/10.31004/riggs.v5i1.6544

Keywords:

Master Machine, Bosch Pump, Quantitative, Puncture Valve

Abstract

The Main Mover Diesel Engine or Main Engine on a ship is the main device responsible for moving the ship forward and backward. The diesel engine fuel system, which includes the Bosch Pump, is a critical component in maintaining the engine's performance by providing the fuel necessary for combustion and propulsion of the vessel. The injector, which is used to spray fuel into the engine cylinder, is an important part of the system that supports the efficient combustion process in the main engine. The method used is a quantitative method which includes the collection and analysis of numerical data. By conducting surveys, experiments, or secondary data analysis, researchers can find patterns or generalizations in a larger population. By using quantitative methods, it will be possible to determine the cause of the decrease in Bosch pump pressure on the ship MV.Tanto Bersinar. The analysis of running hoaurs of puncture valve on the fuel injection pump for cylinder 1-8 demonstrates that the wear of puncture valve especially in cylinder 2 with 4.970 hours approaching the planned maintenance system (PMS )limit of 5.000 hours significantly affects injection pressure stability ,combustion,quality ,and main engine officiency ,which can be restored throngh critical component replacement,inspections close to PMS and injection pump recalibration.

Downloads

Download data is not yet available.

References

Adirinarso, D. (2023). No Titleیلیب. Nucl. Phys., 13(1), 104–116.

Alatas, Z. Y., Wibowo, R., & Slamet, S. (2022). Rancang Bangun Pompa Air Sistem Aksial. Jurnal Crankshaft, 5(1), 46–54. https://doi.org/10.24176/crankshaft.v5i1.7163

Ashadrul, M., Pane, A., Wakhinuddin, S., Putra, D. S., & Nasir, M. (2016). Pengaruh Tegangan Pompa Bahan Bakar Terhadap Kandungan Emisi Gas Buang Fuel Pump Voltage Effect On Exhaust Emissions. 12, 53–62. Buku ini di tulis oleh Dosen Universitas Medan Area Hak Cipta di Lindungi oleh Undang-Undang Telah di Deposit ke Repository UMA pada tanggal 27 Januari 2022. (2022).

Dwiana, A. S. (2023). Analisa Kinerja Tiga Buah Mesin Induk Penggerak Utama Kapal Di Ahts Christos Lvii. Saintara : Jurnal Ilmiah Ilmu-Ilmu Maritim, 7(1), 49–52. https://doi.org/10.52475/saintara.v7i1.195

Gudiato, C., Cahyaningtyas, C., & P., N. (2024). G-Tech : Jurnal Teknologi Terapan. G-Tech : Jurnal Teknologi Terapan, 8(1), 186–195. https://ejournal.uniramalang.ac.id/index.php/g-tech/article/view/1823/1229

Gusti, I., Sembiring, P., & Ritonga, A. A. (2024). Pemanfaatan Panel Surya Untuk Pompa Air Dengan Tenaga Matahari. 2(2), 164–171.

Jaya, M. T. S. (2024). Penanggulangan Terjadinya Kecelakaan Kerja Awak Kapal Bagian Mesin di. 1, 91–99.

Kognisi, P. K., Risiko, P., Jenis, D. A. N., Bidori, F., Puspitowati, L. I. dan I., Wijaya, I. G. B., Alifah, U., Artikel, I., Paedagoria, S. N., Anwar, I., Jamal, M. T., Saleem, I., Thoudam, P., Hassan, A., Anwar, I., Saleem, I., Islam, K.

M. B., Hussain, S. A., Witcher, B. J., … alma. (2021). No Title. Industry and Higher Education, 3(1), 1689–1699.

http://journal.unilak.ac.id/index.php/JIEB/article/view/3845%0Ahttp://dspace.uc.ac.id/handle/123456789/1288

Moch Zainuddin. (2021). Legal Protection in Sea Employment Agreement for Seafarers Based on Marine Labor Convention. Jurnal Hukum Dan Etika Kesehatan, 1(2), 130–144.

Prasetyo, I., & Anam, K. (2019). KEOLENGAN POROS ENGKOL PADA MESIN DIESEL MITSUBISHI PS 100. 3(1), 33–37.

Tarigan, K., Hasballah, & Malau, B. D. (2020). Pengaruh Kalibrasi Pompa Injeksi Sebaris Pada Mesin Diesel Terhadap Emisi Gas Buang dan Konsumsi Bahan Bakar. Jurnal Teknologi Energi Uda, 9, 62–73.

Waruwu, M., Natijatul, S., Utami, P. R., & Yanti, E. (2025). Metode Penelitian Kuantitatif : Konsep , Jenis , Tahapan dan Kelebihan. 10, 917–932.

Yaqin, R. I., Siahaan, J. P., Priharanto, Y. E., Alirejo, S., & Umar, M. L. (2020). Pendekatan FMEA dalam Analisa Risiko Perawatan Sistem Bahan Bakar Mesin Induk : Studi Kasus di KM . Sidomulyo. 9(3), 189–200.

Yudianto, P. Y., Robbi, S. D., & Dahri, M. (2024). Analysis of Data Communication Networks for VTS Surabaya in Class I Type A Navigation District Tanjung Perak. Jurnal Indonesia Sosial Sains, 5(11), 2924–2933. https://doi.org/10.59141/jiss.v5i11.1505