Peningkatan Efektifitas Mesin dengan Metode Overall Equipment Effectiveness

Ahmad Andreas Tri Panudju

doi:10.31004/riggs.v4i1.423

Authors

Ahmad Andreas Tri Panudju Bhayangkara Jakarta Raya University

DOI:

https://doi.org/10.31004/riggs.v4i1.423

Keywords:

Produktivitas, OEE, Six Big Losess

Abstract

SFX memiliki produktivitas mesin yang seringkali terjadi kerusakan mengakibatkan proses produksi terhambat serta terganggu. Jika mesin mengalami kerusakan mendadak dikarenakan kurang terpelihara, kualitas produk, dan produktivitas makin menurun. Mengantisipasi kerusakan mesin diperlukan perhitungan Overall Equipment Effectiveness untuk mengetahui tingkat produktivitas. Tujuan untuk penelitian ini mengetahui nilai OEE. Overall Equipment Effectiveness adalah metode yang menggambarkan performansi dan mengetahui keefektifan mesin. Six Big Losess dihitung untuk mengetahui OEE dari suatu peralatan agar dapat diambil langkah-langkah untuk perbaikan mesin tersebut secara efektif. Hasil perhitungan OEE tehadap produktivitas mesin di PT. SFX sebesar 0.12 (12%) dan nilai Six Big Losess diperoleh rata-rata nilai persentase masing-masing losses, yaitu Equipment Failure Loss yaitu sebesar 35.7%, Reduced Speed Loss dengan total persentase sebesar 34.7%, Set up adjustmen Loss sebesar 27.7%, Idling Minor Stoppages sebesar 1.0%, Rework Loss sebesar 0.8% dan Scrap/Yield Loss sebesar 0.1%. Hal ini menunjukkan bahwa pengaruh Six Big Losess yang menyebabkan nilai OEE tidak mencapai nilai 100%, sehingga perlu adanya perbaikan atau peningkatan agar dapat mencapai nilai OEE yang sempurna.

Downloads

Download data is not yet available.

References

Y. S. T. Siahaan and A. Arvianto, “Analisis Overall Equipment Effectiveness (OEE) pada Pulp Machine dan Six Big Losses di PT Toba Pulp Lestari, Tbk,” Ind. Eng. Online J., vol. 7, no. 4, pp. 343–354, 2019, [Online]. Available: https://ejournal3.undip.ac.id/index.php/ieoj/article/view/23054

A. M. Maghfiroh and A. B. Chandra, “Thermo Valve Air Compressor Maintenance and Repair Using the Overall Equipment Effectiveness (OEE) Method in Maintenance,” Int. J. Eng. Contin., vol. 2, no. 1, pp. 1–13, 2023, doi: 10.58291/ijec.v2i1.59.

M. A. Azra and K. Dwijayanti, “Total Productive Maintenance Analysis of the Oven Machine Using Overall Equipment Effectiveness Method,” J. Ind. Eng. Halal Ind., vol. 3, no. 1, pp. 49–56, 2022, doi: 10.14421/jiehis.3537.

V. M. Afma, H. Irwan, and E. Berliani, “Increase Production Output on Twa 1342 Machine With Overall Equipment Effectiveness (Oee) Method (Case Study: Pt Xyz Batam),” Sigma Tek., vol. 5, no. 2, pp. 267–274, 2022, doi: 10.33373/sigmateknika.v5i2.4642.

M. K. Abrianto, D. P. Sari, and R. N. Rachmadita, “Analysis of Terminal Truck Effectiveness With Overall Equipment Effectiveness,” Spektrum Ind., vol. 19, no. 1, p. 29, 2021, doi: 10.12928/si.v19i1.19648.

S. Nallusamy, “Enhancement of Productivity and Efficiency of CNC Machines in a Small Scale Industry Using Total Productive Maintenance,” Int. J. Eng. Res. Africa, vol. 25, pp. 119–126, 2016, doi: 10.4028/www.scientific.net/jera.25.119.

K. R. Pokhrel, “A Seminar Paper on ‘Overall Equipment Effectiveness: A Case Study at a Bottling Plant,’” Ijeast, vol. 8, no. 1, pp. 9–20, 2023, doi: 10.33564/ijeast.2023.v08i01.002.

N. E. Candra, A. Susilawati, H. Herisiswanto, and W. Setiady, “Implementation of Total Productive Maintenance (TPM) to Improve Sheeter Machine Performance,” Matec Web Conf., vol. 135, p. 28, 2017, doi: 10.1051/matecconf/201713500028.

R. E. Nugroho and S. Khoirudin, “Overall Equipment Effectiveness Improvement on Cutting Machine by Minimizing Six Big Losses,” Saudi J. Bus. Manag. Stud., vol. 05, no. 01, pp. 84–98, 2020, doi: 10.36348/sjbms.2020.v05i01.011.

A. M. Sokolov, N. U. I. Hossain, A. Storms, and B. Merrill, “Implementing the Overall Equipment Effectiveness Metric in an Industrial Manufacturing Environment,” 2023, doi: 10.46254/an13.20230008.

G. B. HM and A. S. Mifthada, “Analysis of Centrifugal Pump Machine Performance Using the Overall Equipment Effectiveness (OEE) Method (Case Study: PT. XYZ),” J. Appl. Sci. Manag. Eng. Technol., vol. 4, no. 1, pp. 37–44, 2023, doi: 10.31284/j.jasmet.2023.v4i1.4494.

F. A. Saputra and M. Rady, “Increased Productivity of Packing Machines Through Implementation of Total Productive Maintenance Using the Overall Equipment Effectiveness Method Case Study of PT. GFPJ,” J. Serambi Eng., vol. 8, no. 4, 2023, doi: 10.32672/jse.v8i4.6173.

C. F. Susilo and A. Andika, “Overall Equipment Effectiveness Improvement With Total Productive Maintenance Method,” 2016, doi: 10.2991/gcbme-16.2016.37.

C. Jaqin, D. Alimudin, H. H. Purba, and S. Aisyah, “Performance Improvement of Injection Pump Machines Based on Overall Equipment Effectiveness: Case Study in Oil Company,” 2019, doi: 10.2991/icoemis-19.2019.15.

P. Kumar, D. Singh, and J. Bhamu, “Development and validation of DMAIC based framework for process improvement: a case study of Indian manufacturing organization,” Int. J. Qual. Reliab. Manag., vol. 38, no. 9, pp. 1964–1991, 2021, doi: 10.1108/IJQRM-10-2020-0332.

W. N. Muslih Nasution, Ahmad Bakhori, “Manfaat Perlunya Manajemen Perawatan Untuk Bengkel Maupun Industri,” Bul. Utama Tek., vol. 3814, pp. 248–252, 2021.

B. Manjunatha, T. R. Srinivas, and C. G. Ramachandra, “Implementation of total productive maintenance (TPM) to increase overall equipment efficiency of an hotel industry,” MATEC Web Conf., vol. 144, 2018, doi: 10.1051/matecconf/201714405004.

M. Irfan, “Analisis Overall Equipment Effectiveness untuk Meningkatkan Keefektifan pada Mesin Press,” J. Indones. Sos. Teknol., vol. 2, no. 07, pp. 1173–1182, 2021, doi: 10.36418/jist.v2i7.194.

R. S. Sen, G. Majumdar, and S. Nallusamy, “Enhancement of overall equipment effectiveness through implementation of total productive maintenance,” Proc. Int. Conf. Ind. Eng. Oper. Manag., no. July, pp. 475–484, 2019.

R. Mulana, D. Herwanto, S. S. Stepanus, and P. Sitorus, “Analisis Perhitungan Effektivitas Mesin Takamaz x-150 di PT X Menggunakan Overall Equipment Effectiveness,” J. Serambi Eng., vol. 8, no. 2, pp. 5416–5425, 2023.

I. Setiawan, “Integration of total productive maintenance and industry 4.0 to increase the productivity of nc bore machines in the musical instrument industry,” Proc. Int. Conf. Ind. Eng. Oper. Manag., pp. 4701–4711, 2021, doi: 10.46254/an11.20210826.

M. Schmidt and M. Nakajima, “Material flow cost accounting as an approach to improve resource efficiency in manufacturing companies,” Resources, vol. 2, no. 3, pp. 358–369, 2013, doi: 10.3390/resources2030358.